Family owned in Paulding County · Serving Paulding, Cobb, Douglas, Carroll, Polk & Haralson
Mon–Fri 8–6 · Sat 10–3 Call or text [phone]
Family owned in Paulding County · Serving Paulding, Cobb, Douglas, Carroll, Polk & Haralson
Mon–Fri 8–6 · Sat 10–3 Call or text [phone]
Home › Specialty › Epoxy Flooring
Epoxy and polyaspartic concrete coatings for garages, shops, basements, and patios across Paulding, Cobb, Douglas, Carroll, Polk, and Haralson Counties.
Most people walk through their garage more than their front door. And most garage floors are bare, stained concrete that sheds dust, soaks up oil, and looks worse every year. An epoxy floor fixes all of that in a couple of days. It seals the concrete, it wipes clean, it brightens the whole space, and it holds up to hot tires, dropped wrenches, and whatever leaks out from under the truck.
Ramsey Contracting installs epoxy and polyaspartic floor coatings across West Georgia. Coatings were part of what we did under the PRE Coatings name, and we’ve carried that experience into Ramsey Contracting. We’ve seen what happens when a coating is rolled over dirty, unprepared concrete, because we’ve been called to fix it. So we do it the right way, which starts with the prep.
The number one spot. Two-car, three-car, and detached garages.
Anywhere tools, oil, and dropped parts are part of the deal.
Seals concrete, cuts dust and moisture, and turns a gray slab into a finished-looking floor.
Outdoor-rated coatings with slip resistance.
Shops, warehouses, showrooms, and back-of-house areas that need a floor that cleans up fast.
We install both, and a lot of our floors use an epoxy base with a polyaspartic topcoat to get the best of each. We’ll tell you honestly which setup fits your space and your budget.
is the traditional coating. It’s thick, it bonds hard to concrete, and it’s very durable. It takes longer to cure (usually a few days before you can park on it) and can yellow a bit over time with direct sun.
is a newer coating that cures fast, sometimes same-day, and stays clear and color-stable in UV light. It’s more flexible, handles temperature swings well, and costs a little more.
We bring sample boards so you can see them in your own garage light.
Clean, simple, and easy to keep looking new. Gray, tan, and charcoal are the most popular.
Colored vinyl flakes broadcast into the base coat and sealed under a clear topcoat. Hides dirt, adds texture for grip, and looks like a showroom. This is what most of our customers pick.
Swirled, marbled looks for basements, showrooms, and spaces where the floor is meant to be noticed.
Colored quartz sand for heavy-duty slip resistance in shops and commercial spaces.
Anybody can pour a coating on a floor. What separates a floor that lasts fifteen years from one that peels in six months is what happens before the coating goes on.
We mechanically grind the concrete to open up the surface so the coating bonds into it, not just onto it. Acid etching, which a lot of cheap installers use, doesn’t come close.
Cracks get chased and filled. Spalled and pitted spots get patched flat.
Concrete that’s pushing moisture up from below will lift a coating off. We test first and use a moisture-mitigating primer where needed.
All the grinding dust vacuumed and the surface wiped so nothing sits between the concrete and the coating.
Primer, base coat, flake or color, and topcoat, each applied at the right thickness and given the right cure time between them.
Every epoxy floor gets walked before, during, and after. The crew leader and project manager check the prep before the first coat, check coverage between coats, and inspect the cured floor before you park on it. Most coating crews are in and out in a day and never look back. We look before, during, and after.
Epoxy is priced by the square foot, and the price depends on the condition of the concrete, the system, and the finish. We’ll come out, look at your slab, and write an estimate that lists prep, repair, coating system, and finish separately. If a cheaper bid doesn’t mention grinding, that’s the difference, and you’ll see it when the floor peels.
We offer financing on qualifying projects. Ask when you call.
Ramsey Contracting is based in Dallas, GA. We install epoxy and polyaspartic floors throughout Paulding County and across Cobb, Douglas, Carroll, Polk, and Haralson Counties, including Hiram, Powder Springs, Douglasville, Carrollton, Villa Rica, Rockmart, Cedartown, and Bremen. We’ve done coating work in Newnan and Fayetteville too. Larger commercial jobs, anywhere in Georgia.
Dallas, Hiram
Powder Springs, Austell, Marietta
Douglasville, Lithia Springs
Carrollton, Villa Rica, Temple
Rockmart, Cedartown
Bremen, Tallapoosa, Buchanan
Call or text [phone] or send us a message. We’ll look at your concrete, show you sample boards, and give you a real number.
[phone]
Call or text
[email]
We reply the same business day
Hours: Monday–Friday 8am–6pm · Saturday 10am–3pm
Projects start at $1,000. We don’t offer spot touch-ups or small patch coatings as standalone jobs.
